Motor Type: On Road
Turn: 12T
SIZE: 130
KV3(Rpm/Volt): 7800
Shaft Diam (MM): 2.00mm


1 Specification
1.1 Output: Continuous current 18A, burst current 50A.
1.2 Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. Note1
1.3 BEC Output: 6V/1A.
1.4 Resistance: 0.01 Ohm.
1.5 Motor Supported: Sensorless Brushless Motor
1.6 Suitable Brushless Motor: 9T and > 9T
1.5 Suitable Car: 1/10, 1/12 on-road or off-road cars / trucks for normal race or sportful race.
1.6 Size: 31.5mm(L) * 24mm(W) * 15mm(H).
1.7 Weight: 19g(Without wires)
Note1:
For 4-6 Cell Ni-xx: You needn't change the fan coming with the ESC;
For 7-9 Cell Ni-xx: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V);
2 Features
2.1 Compatible with all sonsorless brushless motor.
2.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
2.3 Excellent start-up, acceleration and linearity features.
2.4 With 2 running modes (Racing mode and Forward/Backward mode).
2.5 With 4 steps of maximum reverse force adjustment.
2.6 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
2.7 With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
2.9 With 8 steps of timing adjustment to get the best compatibility with various of motors.
2.10 Easily program with only one button and compatible with pocket-sized program card.
3 Programmable Items
For detail information, please read the user manual for reference.<